7.
Set the items in "Basic Settings" as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GN11-EIP(T+E)] [Port1 Module Parameter (CC-
Link IE TSN)] [Basic Settings]
In this manual, "Authentication Class" is described as "CC-Link IE TSN Class".
8.
Set the network configuration as follows. (Set the IP address for each station.)
[Navigation window] [Parameter] [Module Information] [RJ71GN11-EIP(T+E)] [Port1 Module Parameter (CC-
Link IE TSN)] [Basic Settings] [Network Configuration Settings] [Detailed Setting]
In this manual, "Authentication Class" is described as "CC-Link IE TSN Class".
9.
Click the [Close with Reflecting the Setting] button to close the "CC-Link IE TSN Configuration" window.
10.
Set the refresh settings as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GN11-EIP(T+E)] [Port1 Module Parameter (CC-
Link IE TSN)] [Basic Settings] [Refresh Settings] [Detailed Settings]
11.3 Examples of Communication with CC-Link IE TSN Class A Remote Stations
11 PROGRAMMING
237
11