Program Example - Mitsubishi Electric MELSEC iQ-R Series User Manual

Program example

The UCMM tag communication program is executed by changing the CPU module from STOP to RUN.
Originator-side program
Classification Label name
Module label GN11_SE_1.EIP.bSts_CommunicationDuringStartup
GN11_SE_1.EIP.bSts_CommunicationReady
GN11_SE_1.EIP.uSet_CommunicationStart_D
Labels to be Define global labels as shown below.
defined
FBs to be used • M+RJ71GN11_SE_EIP_UCMMOriginator_WriteTagData
• M+RJ71GN11_SE_EIP_UCMMOriginator_ReadTagData
13 PROGRAMMING
324
13.4 UCMM Tag Communications Communication Example
Description
EtherNet/IP communication in process
Communication Ready
EtherNet/IP communication start request
Device
X10
X1F
U0\G7340096