Mitsubishi Electric MELSEC iQ-R Series User Manual page 401

■When "Use TSN HUB" is set
If "TSN HUB Setting" in "Connection Device Information" under "Basic Settings" is set to "Use TSN HUB", check the following.
Check item
Are a CC-Link IE TSN Class B device and CC-Link IE TSN Class A device
connected directly or via a general-purpose hub?
No.0
No.1
Class B
Class B
No.2
Class B
Are a CC-Link IE TSN Class B device and CC-Link IE TSN Class A device
connected directly or via a general-purpose hub?
No.0
No.1
Class B
Class B
No.2
Class B
No.4
Class A
General-
purpose hub
No.5
Class A
No.3
Class B
No.4
Class A
General-
purpose hub
TSN HUB
No.5
Class A
No.3
Class B
Action
Set "TSN HUB Setting" in "Connection Device Information" under "Basic
Settings" to "Not to Use TSN HUB".
No.0
No.1
Class B
Class B
No.2
Class B
Connect the CC-Link IE TSN Class B device and CC-Link IE TSN Class A
device via a TSN hub.
No.0
No.1
Class B
Class B
No.2
Class B
Ensure that the total cyclic data size of all slave stations on the CC-Link IE
TSN Class A device side that form a boundary between CC-Link IE TSN
Class B and CC-Link IE TSN Class A does not exceed 2K bytes (1).
No.0
Class B No.1
Class B
No.2
Class B
18 TROUBLESHOOTING BY SYMPTOM
18.1 Troubleshooting Related to CC-Link IE TSN
No.4
Class A
General-
purpose hub
No.5
Class A
No.3
Class B
No.4
Class A
TSN HUB TSN HUB
No.5
Class A
No.3
Class B
(1)
General- No.4
purpose hub Class A
TSN HUB
No.5
Class A
No.3
Class B
No.6
Class A
18
399