Mitsubishi Electric MELSEC iQ-R Series User Manual page 360

■Details of interface capability flag
Bit Description
0 BOOTP Client
1 DNS Client
2 DHCP Client
3 DHCP-DNS Update
4 Configuration Settable
5 Hardware Configurable
6 Interface Configuration Change Requires
Reset
7 AcdCapable
8 to 31 Reserved
■Details of interface control flag
Bit Description
0 to 3 Configuration Method
4 DNS Enable
5 to 31 Reserved
Instance service
Service code
01H
0EH
10H
14 MESSAGE COMMUNICATION SUPPORT COMMANDS
358
14.4 TCP/IP Interface
Value
Fixed to 0 (because the BOOTP setting is not supported)
Fixed to 0 (because the name resolution setting with DNS is not supported)
Fixed to 0 (because IP address setting with DHCP is not supported)
Fixed to 0 (because the host name transmitting setting with DHCP requests is not
supported)
Fixed to 0 (because Interface Configuration attribute setting is not supported)
Fixed to 1 (available for IP addresses set with parameters)
Fixed to 0 (because Interface Configuration attribute setting is not supported)
Fixed to 0 (because the address duplication detection setting is not supported)
Fixed to 0
Value
Fixed to 0 (to use IP addresses set with parameters)
Fixed to 0 (because the name resolution setting with DNS is not supported)
Fixed to 0
Service
Get_Attributes_All
Get_Attribute_Single
Set_Attribute_Single