Hitachi GS4000 Series Quick Start Manual page 61

NOTE A device name you input will be shown at the beginning of a prompt.
(3) Check configuration information you input.
In order to check configuration information you input, display its contents on the screen.
(If you have information to be shown over several pages, only the first page will be shown. In such a case, you can trun the
pages by entering the [space] key.)
Case 1: Information setting in the configuration given in Example 1
Check if the following items are set correctly.
・device name
・VLAN100 information
・VLAN200 information
show
!GS1(config)#
#startup configuration file
!
system name "GS1"
!
vlan 1
description "Default VLAN"
router-interface DefaultVLAN
!
vlan 100
untagged-port 0/0-1
tagged-port 0/4
!
vlan 200
untagged-port 0/2-3
tagged-port 0/4
!
!GS1(config)#
NOTE The information set for VLAN1 above is for the default VLAN set at the time
of initial system introduction.
QSGGS4KX10-00 5794092-2X
...Show the contents you input.
Setting for a device name
...
Setting for VLAN1
Setting for VLAN100
Setting for VLAN200
GS4000 Quick Start Guide, Revision 3
Configuration information
displayed.
43