Hitachi GS4000 Series Quick Start Manual page 62

GS4000 Quick Start Guide, Revision 3
Case 1: Information setting in the configuration given in Example 2
Check if the following items are set correctly.
・device name
・VLAN100 information
・ VLAN200 information
・ RIP
show
!GS1(config)#
#startup configuration file
!
system name "GS1"
!
vlan 1
description "Default VLAN"
router-interface DefaultVLAN
!
vlan 100
untagged-port 0/0-3
router-interface VLAN100
ip 192.168.1.1/24
!
vlan 200
untagged-port 0/4
router-interface VLAN200
ip 192.168.2.1/24
!
rip yes
interface VLAN100
interface VLAN200
!
!GS1(config)#
NOTE The information set for VLAN1 above is for the default VLAN set at the time
of initial system introduction.
44
...Show the contents you input.
Setting for a device name
...
Setting for VLAN1
Setting for VLAN100
Setting for VLAN200
Setting for RIP
Configuration information
displayed.
QSGGS4KX10-00 5794092-2X