Siemens LMV5 Quick Start Manual page 115

Notes
In: Operational Stat > Normal Operation , the AZL display contrast can be adjusted.
Contrast Adjust
To do this, keep the Enter button depressed, and at the same time press either Select button, < or >.
Manual Lockout - A lockout can be initiated by pressing Enter and Esc simultaneously.
Shutdown function This functions as a built-in E-stop (emergency-stop).
Lockout will be stored in the AZL .
To go back out of the menu and check burner operation, press the 2 Select buttons, < and > simultaneously.
Quick Access to Normal This will take the cursor to Normal Operation, so the normal operation screen can be viewed by pressing Enter.
Operation This can be done anywhere in the menu, as long as a single parameter is not currently displayed on the screen.
Pressing Esc after pressing the two select buttons will take the cursor back "in" to where it was.
When the: Operational Stat > Normal Operation screen is displayed,
Actuator positions (Only
the Enter key can be pressed, one additional time, so that the actuator positions
on LMV52)
of all devices (O2 module VSD etc..) will be displayed.
LMV5 QSG Rev 4 Sec 4 Pg 59 www.scccombustion.com