Siemens LMV5 Quick Start Manual page 20

Accessories 2-4
AGG5.210 Transformer(s)
The AGG5.210 transformer supplies 12 VAC power to the LMV5 base unit, AZL5, actuators, and
PLL52 (if equipped). This transformer should also be mounted in an enclosure that shields the
transformer from dirt and water. At least one transformer is necessary for each LMV5 base unit.
Depending upon how many devices are connected to the CANbus, (actuators, PLL52 module, etc)
two AGG5.210 transformers may be necessary.
Note: If a second transformer is used, locate it as close as possible to the actuators / PLL52
that it powers.
Section 3-1, Figure 3-1.4 outlines when two transformers should be used.
Figure 2-4.1 gives the dimensions of a AGG5.210 transformer. The transformer may be mounted
with the plugs facing downward or upward. Oval holes are provided for use with self tapping or
machine screws.
Please see Section 10-1 for specifications.
LMV5 QSG Rev 4
Figure 2-4.1 AGG5.210 Dimensions (inches)
Sec 2 Pg 4 www.scccombustion.com