Table of Contents
Advertisement
11.5.13.3
Step size for step-wise dimming (%)
Options:
The parameter is used to specify how many percent per step the light is dimmed. The value
sent, always relates to the current brightness value.
Example (setting 12.5%):
The light is dimmed to a brightness value of 70%. With a press of the button the command "Dim
brighter by 12.5%" is sent. After receiving the dimming command, the dimming actuator
increases the brightness value to 82.5%.
Note
If step-wise dimming is used to evenly dim multiple dimming actuators in
different lines, a low step size should be selected, e.g. 3.13%. At the same time
the cyclical sending of the dimming telegrams should be activated. This ensures
that dimming telegrams are sent continuously as long as the button is pressed.
Note
The parameter is only adjustable if the "Dimming mode" parameter is set on
"Step-wise dimming".
Product manual 2CKA001473B9488
Description of application and parameters
1.56
3.13
6.25
12.5
25
50
Application "Function block x"
│111
Advertisement
Table of Contents
