Value For Cyclic Sending - ABB tacteo KNX Product Manual

11.7.2.8

Value for cyclic sending

The possible options and setting limits depend on parameter "Object type".
Options for selection "1 bit switching" and "1-bit alarm":
Options:
Options for selection "1 byte 0-100%":
Options:
Options for selection "1 byte 0-255":
Options:
Options for selection "2-byte float":
Options:
Options for selection "2-byte signed":
Options:
Options for selection "2-byte unsigned":
Options:
Options for selection "2-byte temperature":
Options:
Options for selection "4-byte float":
Options:
Options for selection "4-byte signed":
Options:
Options for selection "4-byte unsigned":
Options:
The parameter is used to fix the value that must be received on object "GFx: input" to ensure
that the same value is sent cyclic via object "GFx: output". The bit size depends on parameter
"Object type".
Product manual 2CKA001473B9488
Description of application and parameters
Off
One
Setting option from 0 to 100 (%)
Setting option from 0 to 255
Setting option from -671088.64 to 670760.96
Setting option from -32768 to +32767
Setting option from 0 to 65535
Setting option from -273 to 500
Setting option from -4000000 to 4000000
Setting option from -2147483648 to 2147483647
Setting option from 0 to 4294967295
Application "General functions"
│151