Colour For On - ABB tacteo KNX Product Manual

11.5.18.5

Colour for On

Options:
Off:
■
– The LED is switched off.
Yellow - white:
■
– The LED lights up in the fixed colour at switching signal "On".
The parameter is used to specify the colour the button LED lights up in when the device
receives an On telegram via the 1-bit communication object "Lx: status LED". The default
setting is "red".
Note
The parameter can only be set if the "Operating mode" parameter and is set on
"Status illumination" and the "Object type for status object" parameter is set on
"1 bit".
Product manual 2CKA001473B9488
Description of application and parameters
Off
Yellow
Red-orange
Red
Violet
Blue
Green
White
Application "Function block x"
│132