Table of Contents
Advertisement
11.5.7.3
Reaction on falling edge
Options:
No reaction:
■
–
No telegram is sent when the button is released.
Value 1:
■
–
Value 1 is sent when the button is released (at falling edge).
Value 2:
■
–
Value 2 is sent when the button is released (at falling edge).
Alternating value 1/value 2:
■
–
Value 1 and value 2 are sent alternately when the button is released.
Application "1-button value transmitter, 2 objects" can differentiate between the press and the
releasing of a button. A press is defined as "Rising edge" and the releasing as "Falling edge".
The application makes two separate communication objects available for the rising and falling
edge of a button.
The parameter is used to specify whether a telegram with value 1 or value 2 is sent on the bus
at a falling edge via communication object "Sx: switching (falling edge)". A further option can be
specified as to whether the telegrams are sent alternately. This means that after value 1 has
been sent, value 2 is sent at a renewed release of the button. After it is released again, value 1
is again sent out.
Note
Parameter "Value 1 for falling edge" and "Value 2 for falling edge" is used to
specify the values that are to be sent.
Product manual 2CKA001473B9488
Description of application and parameters
No reaction
Value 1
Value 2
Alternating value1/value2
Application "Function block x"
│87
Advertisement
Table of Contents
