Application "Function Block X; Function Block X - Application - ABB tacteo KNX Product Manual

11.5

Application "Function block x"

Depending on the device type, from one to six function blocks with buttons and LED
applications for up to 12 buttons are available:
Function block 1: Settings for buttons 1 and 2.
■
For a 1gang device only one function block with a 1-button application is available.
Function block 2: Settings for buttons 3 and 4.
■
Function block 3: Settings for buttons 5 and 6.
■
Function block 4: Settings for buttons 7 and 8.
■
Function block 5: Settings for buttons 9 and 10.
■
Function block 6: Settings for buttons 11 and 12.
■
11.5.1

Function block x - Application

Button applications:
Options:
Note
The following parameters can only be adjusted when the corresponding
application (see above) is selected.
1-button switching:
■
– The application makes it possible to switch a light via a button. Additional information,
See "Application - 1-button switching" on page 64.
1-button dimming:
■
– The application makes it possible to dim and switch a light via a button. Additional
information, See "Application - 1-button dimming" on page 66.
1-button blind:
■
Product manual 2CKA001473B9488
Description of application and parameters
1-button switching
1-button dimming
1-button blind
1-button short-long operation
1-button value transmitter
1-button value transmitter, 2 objects
1-button step switch
1-button multiple operation
1-button light scene extension unit with memory function
1-button operating mode, "Adjust RTC"
2-button switching
2-button dimming
2-button blind
2-button value transmitter
2-button value dimming sensor
2-button step switch
Inactive
Application "Function block x"
│61