Reaction On Short Operation - ABB tacteo KNX Product Manual

11.5.5.2

Reaction on short operation

Options:
No reaction:
■
– No telegram is sent at a short press of the button.
Value 1:
■
– Value 1 is sent at a short press of the button.
Value 2:
■
– Value 2 is sent at a short press of the button.
Alternating value 1/value 2:
■
– Value 1 and value 2 are sent alternately at a short press of the button.
The parameter is used to specify whether value 1 or value 2 is sent on the bus at a short press
of the button. A further option can be specified as to whether the telegrams are sent alternately.
This means that after value 1 has been sent, value 2 is sent at a renewed press of the button.
After it is pressed again, value 1 is again sent out.
Note
Parameter "Value x for short operation" is used to specify the values that are to
be sent.
Product manual 2CKA001473B9488
Description of application and parameters
No reaction
Value 1
Value 2
Alternating value1/value2
Application "Function block x"
│75