iSitePower-M (MAP05A1, MAB05B1)
User Manual
6.2 Installing a Mounting Bracket
6.2.1 Ground Mounting
The base must be secured to the ground using bolts. Otherwise, the device may
tip over, causing personal injury or device damage.
Procedure
Step 1 Cut the marking-off template along the dotted line.
Figure 6-3 Cutting the marking-off template
Step 2 Mark mounting holes for the base.
Issue 02 (2021-12-30)
WARNING
NO TE
Two marking-off templates are required for ground mounting. A small marking-off
template determines holes on the ground, and a large marking-off template determines
holes on the wall.
Copyright © Huawei Digital Power Technologies Co., Ltd.
6 System Installation
45