Toshiba Satellite 110 Series Maintenance Manual page 23

2.3 Power Supply Troubleshooting
The power supply controls many functions and components in the computer. To determine if
the power supply is functioning properly, start with Procedure 1 and continue with the other
Procedures as instructed. The procedures described in this section are:
Procedure 1:
Procedure 2:
Procedure 3:
Procedure 4:
Procedure 1 AC IN Icon Check
The AC PS unit converts AC power to DC power and contains a charging circuit which
charges the computer's batteries. The AC power cord connects to the AC IN socket connec-
tor on the back side of the computer. When the AC power cord is connected to the computer,
the AC PS unit charges the batteries.
The AC IN icon displays whether the AC power cord is connected and supplying power.
When the AC IN icon is green, the AC power cord is connected and supplying power to the
computer.
If the AC IN icon does not light, the AC power cord is not supplying power to the computer
or the AC power cord is not attached to the computer. Go to Check 1.
If the AC IN icon is flashing orange, the AC power cord's voltage supply is abnormal or the
power supply is not functioning properly. Go to Check 2.
If any of the above indicator conditions are abnormal, make sure the icon lights are not
burned out before performing the following checks:
Check 1 Make sure the correct AC power cord is firmly plugged into the AC IN socket on
the back of the computer.
Check 2 If the AC IN icon flashes orange when the AC power cord is connected, output
voltage is abnormal. Connect a new AC power cord and turn the computer on
again to verify the indicator condition.
Check 3 The battery pack may be malfunctioning. Replace the battery pack with a new
one and turn the computer on again. If the problem still exists, go to Procedure 2.
110 Series
AC IN Icon Check
Error Code Check
Battery Icon Check
AC PS Unit Replacement Check
2-5