Toshiba Satellite 110 Series Maintenance Manual page 26

Check 6 For error code Fh:
Disconnect the AC cord and remove the main battery pack from the
computer.
Check the main battery pack model name. If a nonstandard pack is in-
stalled, replace it with a standard model.
If the error still exists, go to Procedure 3.
Check 7 For any other error, go to Procedure 3.
Procedure 3 Battery Icon Check
The Battery icon shows the battery charging status.
If the Battery icon glows green, the AC power cord is connected and the battery is fully
charged.
If the Battery icon glows orange, the AC power cord is connected and the battery is being
charged.
If the Battery icon does not glow, go to Check 1.
Check 1 Make sure the AC power cord is firmly plugged into the AC IN socket and wall
outlet. If these cables are connected correctly, go to Check 2.
Check 2 Make sure the main battery pack is installed in the computer correctly. If the
battery pack is installed correctly, go to Check 3.
Check 3 Remove the battery pack and check that the battery terminal is clean and not bent.
If the terminal appears dirty, clean it gently with a cotton swab dipped in alcohol.
If the terminal looks bent or damaged, replace the system board.
If the battery terminal is clean and not bent, go to Check 4.
Check 4 Connect a new AC power cord. If the Battery icon still does not glow, go to
Check 5.
2-8
110 Series