Toshiba Satellite 110 Series Maintenance Manual page 50

2. To execute the Diagnostic Test Menu from the Diagnostics Menu, set the high-
light bar to 1, and press Enter. The following Diagnostic Test Menu appears:
TOSHIBA personal computer xxx DIAGNOSTICS
version X.XX (c) copyright TOSHIBA Corp. 19XX
DIAGNOSTIC TEST MENU :
1 - SYSTEM TEST
2 - MEMORY TEST
3 - KEYBOARD TEST
4 - DISPLAY TEST
5 - FLOPPY DISK TEST
6 - PRINTER TEST
7 - ASYNC TEST
8 - HARD DISK TEST
9 - REAL TIMER TEST
10 - NDP TEST
11 - EXPANSION TEST
88 - ERROR RETRY COUNT SET [HDD & FDD]
99 - EXIT TO DIAGNOSTICS MENU
Refer to Sections 3.4 through 3.14 for detailed descriptions of Diagnostic Tests 1
through 11. Function 88 sets the floppy disk drive and hard disk drive error retry
count. Function 99 exits the submenus of the Diagnostic Test and returns to the
Diagnostics Menu.
Select the option you want to execute and press Enter. The following message
3.
appears:
SYSTEM TEST
SUB-TEST : XX
PASS COUNT: XXXXX ERROR COUNT: XXXXX
WRITE DATA: XX
ADDRESS : XXXXXX STATUS
SUB-TEST MENU :
01 - ROM checksum
02 -
03 -
04 -
05 - Thermistor check
99 - Exit to DIAGNOSTIC TEST MENU
NOTE: The menu your computer displays may differ slightly from the one
shown above.
3-4
↑↓→←
Enter
Esc
XXXXXXX
xxx DIAGNOSTIC TEST VX.XX
[Ctrl]+[Break]
[Ctrl]+[C]
READ DATA : XX
: XXX
↑↓→←
Enter
Esc
: Select items
: Specify
: Exit
; test end
; key stop
: Select items
: Specify
: Exit
110 Series