Clock Setting Operations - Mitsubishi Electric GT11 User Manual

12 - 3
12.1 Time Setting and Display

12.1.3 Clock setting operations

(1) When connecting with an external device which does not have clock function.
If set to [Adjust] or [Broadcast] for [Clock setting] while the GOT is connected with
external devices (PLC or microcomputers) which do not have clock function, the
clock data will not be adjusted.
Refer to the following for the list of PLC installed with clock function.
GT Designer2 Version
GOT1000 Series Connection Manual (for GT Works3)
(Mitsubishi Products), (Non-Mitsubishi Products1), (Non-Mitsubishi
Products 2), (Microcomputer, MODBUS Products, Peripherals)
(2) Clock setting and battery
If [Broadcast] or [None] is selected for [Clock setting], the battery status of the
GOT is required to be normal.
Refer to "GOT internal battery voltage status" to check the battery status.
(3) Operation setting by drawing software
Carry out the setting of clock setting in [GOT set up] in [System Environment] of
GT Designer2.
When using GT Designer3, execute the settings at [GOT Setup...] of [GOT
Environmental Setting].
To change a part of the setting after downloading the project data, change the
setting at the display setting of GOT.
GT Designer2 Version
GT Designer3 Version1 Screen Design Manual (Fundamentals)
If touch the setup item, the setup contents
1
is changed.
(
Adjust Broadcast
If touch button, the setup contents is
OK
2
reflected.
If touch button without touching
3
button, the dialogue box shown on the left
is displayed.
button: The changed value is
OK
canceled, and the screen
is closed.
button: The time display and
Cancel
setting screen is displayed.
If touch button, GOT restarts. After
4
restart, GOT operates with the changed
settings.
Screen Design Manual
Screen Design Manual
)
Adjust/Broadcast None
OK