Basic Operation Of Settings Change - Mitsubishi Electric GT11 User Manual

9.3.3

Basic operation of settings change

Change of setting value
1
Setting item Select button
Touch the select button (setting point) on the screen.
1
• Key: It is a key for selecting the setting value. Repeats with each touch
OK
Numerical
• Key: It is a key for inputting the numerical value. It displays the keyboard on the bottom of
In the above mentioned screen example, there is no setting item which displays the keyboard. For the
operation of keyboard refer to the next page.
Touching
When the setting range exists it repeats the numerical without displaying keyboard.
Example:
Setting...
• Key: It shifts to the setting screen of each setting item when touched.
Setting contents are reflected if
2
If button is pressed without touching
3
are canceled, then the dialog box is closed.
OK button: The changed value is canceled, and the screen is closed.
button: The operation setting screen is displayed.
Cancel
the screen when touched.
confirms the numerical input.
Enter
4800bps 9600bps 19200bps
button is touched.
OK
OK
Setting item Select button
button, the dialogue below is displayed and the changes
9.3.3 Basic operation of settings change
.
ON OFF
9 - 10
9.3 Utility Display
9
10
11
12
13
14
15
16