Power Supply Specifications - Mitsubishi Electric GT11 User Manual

3.4 Power Supply Specifications

• GT1155-QTBD, GT1155-QSBD, GT1150-QLBD
Item
Input power supply voltage
Fuse (built-in, not
exchangeable)
Power consumption
At backlight off
Inrush current
Permissible instantaneous
power failure time
Noise immunity
Dielectric withstand voltage
Insulation resistance
Applicable wire size
Applicable solderless terminal
Applicable tightening torque
(Terminal block terminal
screw)
3 - 8
3.4 Power Supply Specifications
GT1155-QTBD
24VDC (+10% -15%), ripple voltage 200mV or less
1.0A
9.84W (410mA/24VDC) or less
4.32W (180mA/24VDC) or less
15A or less (26.4V) 2ms
Within 5ms
Noise voltage: 1000Vp-p, Noise width: 1 s (by noise simulator of 30 to 100Hz noise
frequency)
500VAC for 1 minute (across power supply terminals and earth)
10M or larger by insulation resistance tester (across power supply terminals and
earth)
0.75 to 2[mm 2 ]
Solderless terminal for M3 screw RAV1.25-3, V2-N3A, FV2-N3A
0.5 to 0.8[N•m]
Specifications
GT1155-QSBD
9.36W (390mA/24VDC) or
less
GT1150-QLBD