Mitsubishi Electric GT11 User Manual page 163

Copy operation
3
The file in the A drive is copied to another directory of the A drive.
Copy to/from C drive or D drive is disabled.
Dialog for selecting a copy destination drive
Dialog for selecting a copy destination folder
Install CF card in the PC, in which create a
1
folder for the copy destination.
Set the same character with [System
Setting] of [System Environment] of GT
Designer2 for the folder name.
When using GT Designer3, set the same
character with [GOT Type Setting...] in
[Common].
GT Designer2 Version
Design Manual
GT Designer3 Version1 Screen
Design Manual (Fundamentals)
Install the CF card mentioned above to
2
GOT.
Refer to the following for inserting/
removing method of CF card.
Section 8.1 CF Card
Open [Project information] and touch the
3
drive of the file to be copied to select the
drive, and then touch the
The dialog for selecting a copy destination
folder as shown left is displayed.
Touch the folder display area to select a
4
folder, and then touch the
The dialog shown left is displayed.
13.3 Project Information
13.3.4 Operation of project information
9
10
11
Screen
12
13
button.
Next
14
button.
Exec.
15
16
13 - 17