Mitsubishi Electric GT11 User Manual page 54

No.
1) RS-232 interface
2) RS-422 interface
3) Hole for unit installation fitting
4) Rating plate (nameplate)
5) CF card access LED
6) CF card access switch
7) CF card cover
8) Option function board (option)
9) Option function board cover
10) Reset switch
11) Battery cover
12) Power terminal
13) Power terminal cover
14) CF card interface
15) CF card eject button
16) Battery
17) Terminating resistor selector switch
4 - 3
4.2 Back Panel
Name
For communicating with controller (PLC, microcomputer board, bar code
reader, RFID, etc) or personal computer (OS installation, project data
download, transparent) (D-sub 9-pin male)
For communicating with controller (PLC, microcomputer board, etc)
(D-sub 9-pin female)
Hole for the inserting installation fittings (accessory) during the GOT
installation to the panel (4 holes at top and bottom)
Lit: CF card accessed Not lit: CF card not accessed
Switch for prohibiting access to CF card before removing the CF card from
the GOT
ON : CF card being accessed (CF card removal prohibited)
OFF : No access to CF card (CF card removal possible)
Open or close when inserting or removing the CF card.
Connect when using optional functions.
Remove when using the option function board.
Hardware reset switch (Use an isolated rod to operate.)
Open or close when replacing the battery.
Power terminal and FG terminal (for power supply (24VDC) to GOT and
grounding)
Open or close when connecting a power terminal. (Color: transparent)
Interface for installing the CF card to GOT
Button for removing the CF card
GT11-50BAT battery for storing clock data, alarm history, recipe data and
time action setting value
(The project data is stored in the built-in flash memory.)
Terminating resistor selector of RS422/485
(330 /OPEN/110 ) (At factory shipment: 330 )
Specifications
-