Display - Mitsubishi Electric GT11 User Manual

14.2.2 Display

This section describes the operation procedure from turning on the power to the GOT to system monitor
display.
Outline until starting the system monitor
1
This subsection describes the flow until the system monitor function screen is displayed after System
monitor (Extended function OS) is installed in the GOT.
Starting from the utility
Display the utility.
After the utility is displayed, touch [Debug & self check]
[Debug] [System monitor] from the Main Menu.
For how to display the utility, refer to the user's manual of
the GOT to be used.
Display the functional change menu screen of the system monitor function.
(1) How to display the utility
(2) If the project data has not been downloaded
Start
Turn on the power to the GOT
For how to display the utility, refer to the following.
Section 9.3 Utility Display
The system monitor can be started from the utility even if the project data has not
been downloaded to the GOT.
Starting from the special function
switch (System Monitor) set in the
project data
Touch the special function switch.
Refer to the following manual for how to set the special
function switch.
GT Designer2 Version Screen Design
Manual
GT Designer3 Version1 Screen Design
Manual (Functions)
14.2 System Monitor
14 - 13
14.2.2 Display
9
10
11
12
13
14
15
16