Connecting To Display I/F - Mitsubishi Electric GT1685 Connection Manual

8.2.3

Connecting to Display I/F

PLC CPU
PLC
Communication
Model name
type
CNC C70
Ethernet
(Q173NCCPU)
*4*5
*1 The destination connected with the twisted pair cable varies with the configuration of the applicable Ethernet network system.
Connect to the Ethernet module, hub, transceiver or other system equipment corresponding to the applicable Ethernet network
system.
Use cables, connectors, and hubs that meet the IEEE802.3 10BASE-T/100BASE-TX standard.
*2 When connecting GT16 of the function version A to an equipment that meets the 10BASE (-T/2/5) standard, use the switching
hub and operate in a 10Mbps/100Mbps mixed environment.
For how to check the function version, refer to the following.
*3 A length between a hub and a node.
The maximum distance differs depending on the Ethernet device to be used.
The following shows the number of the connectable nodes when a repeater hub is used.
• 10BASE-T: Max. 4 nodes for a cascade connection (500m)
• 100BASE-TX: Max. 2 nodes for a cascade connection (205m)
When switching hubs are used, the cascade connection between the switching hubs has no logical limit for the number of
cascades.
For the limit, contact the switching hub manufacturer.
*4 For the system configuration of the CNC C70, refer to the following manual.
*5 Select [Q17nNC] for [Controller Type] in [Ethernet] of GT Designer3.
For [Ethernet] of GT Designer3, refer to the following.
*6 GT14 models compatible with Ethernet connection are only GT1455-QTBDE, GT1450-QMBDE and GT1450-QLBDE.
8 - 14
8. ETHERNET CONNECTION
8.2 System Configuration
CNC
C70
Connection cable
*1
Connection cable
Twisted pair cable
• 10BASE-T
Shielded twisted pair cable (STP) or
unshielded twisted pair cable (UTP):
Category 3, 4, and 5
• 100BASE-TX
Shielded twisted pair cable (STP):
Category 5 and 5e
GT16 User's Manual (Hardware)
C70 Series SET UP MANUAL
8.3.3 Ethernet setting
GOT
GOT
Maximum
segment
Option device
*3
length
- (Built into GOT)
100m
GT15-J71E71-100
Communication driver
Ethernet(MELSEC),Q17nNC,CRnD-700
Number of connectable
equipment
Model
*2
*6
16 GOTs for 1 network