Checking the wiring state (For optical loop system only)
Check if the optical fiber cable is connected correctly in [Loop test] of GX Developer.
For the GX Developer operation method, refer to the following manual.
(2) Check the [Receive direction error station] (The display example on GX Developer Version 8)
Startup procedure
GX Developer
1 - 52
1. PREPARATORY PROCEDURES FOR MONITORING
1.6 Checking for Normal Monitoring
Q Corresponding MELSECNET/H Network System Reference Manual (PLC to PLC network)
[Diagnostics]
[MELSECNET (II)/10/H diagnostics]
Loop test