Accessing By Gx Works2 - Mitsubishi Electric GT1685 Connection Manual

5.
Check-mark either of the following in [PC side I/F
Serial setting].
When connecting the GOT and PC with serial
When connecting the GOT to PC via modem
Mark the [RS-232C] checkbox.
When connecting the GOT and PC with USB
Mark the [USB] checkbox.
6.
The screen returns to the [Transfer Setup]. Click the
[Connection Test] to check if GX Developer has been
connected to the FXCPU.
POINT POINT POINT
How to operate GX Developer
For the GX Developer operation method, refer to the
following manual.
GX Developer Version Operating Manual

23.6.4 Accessing by GX Works2

The following shows the procedure to set the FA
transparent function of GX Works2.

When connecting the GOT and personal
computer with serial or USB
(1) Connecting the GOT and PLC in bus connection or
direct CPU connection (when connecting to QCPU
(Q mode))
1.
Click the Connection Destination view
[Connection Destination]
name)] in the Navigation window of GX Works2.
2.
The [Transfer Setup Connection1] is displayed.
3.
Set the [Transfer Setup Connection1]:
PC side I/F
PLC side I/F
Other Station Setting
4.
Double-click [Serial USB] of the PC side I/F to display
[PC side I/F Serial Setting].
5.
Check-mark either of the following in [PC side I/F
Serial Setting].
When connecting the GOT and PC with serial
When connecting the GOT to PC via modem
Mark the [RS-232C] checkbox.
When connecting the GOT and PC with USB
Mark the [USB] checkbox.
23. FA TRANSPARENT FUNCTION
23.6 Personal Computer Side Setting
[(Connection target data
: Serial USB
: GOT
: No Specification:
23 - 57
17
18
19
20
21
22
23