Mitsubishi Electric GT1685 Connection Manual page 101

2.2 MELSEC iQ-F
The table below shows the device ranges in [MELSEC iQ-
F] as the controller type.
Device name
Input (X)
Output (Y)
Internal relay (M)
Latch relay (L)
Step relay (S)
Annunciator (F)
Link relay (B)
Contact (TT)
Timer
Coil (TC)
Contact (CT)
Counter
Coil (CC)
Contact
(LCT)
Long counter
Coil (LCC)
Special relay (SM)
Contact (SS)
Retentive timer
Coil (SC)
Link special relay (SB)
The bit specification of the
word device
(except Timer, Counter,
Retentive timer, Index register
(Z))
Data register (D)
Special data register (SD)
Link register (W)
Timer (current value) (TN)
Counter (current value)(CN)
Retentive timer (current value)
(SN)
Link special register (SW)
*1
File register (R)
Index register (Z)
Buffer memory
(Intelligent function module)
*2
(G)
The word specification of the
*3
bit device
(except Timer, Counter,
Retentive timer)
Long counter (current value)
*3
(LCN)
Index register (LZ)
*1 Available for file register of block No. switched with the RSET
instruction.
*2 Only the intelligent function module on the station connected
to GOT can be specified.
Set within the address range of the buffer memory existing in
the target intelligent function module.
*3 The device No. must be set in multiples of 16.
Device No.
Setting range
representation
X0 to X1777
Octal
Y0 to Y1777
M0 to M32767
L0 to L32767
Decimal
S0 to S4095
F0 to F32767
B0 to B7FFF Hexadecimal
TT0 to TT1023
TC0 to TC1023
CT0 to CT1023
CC0 to CC1023
LCT0 to LCT1023 Decimal
LCC0 to LCC1023
SM0 to SM9999
SS0 to SS1023
SC0 to SC1023
SB0 to SB7FFF Hexadecimal
Setting range of
―
each word device
D0 to D7999
Decimal
SD0 to SD11999
W0 to W7FFF Hexadecimal
TN0 to TN1023
CN0 to CN1023
Decimal
SN0 to SN1023
SW0 to SW7FFF Hexadecimal
R0 to R32767
Z0 to Z23
Decimal
G0 to G262143
Setting range of
―
each bit devices
LCN0 to LCN1023
-
LZ0 to LZ11
2. DEVICE RANGE THAT CAN BE SET
2.2 MELSEC iQ-F
1
2
3
4
5
6
7
8
2 - 9