Mitsubishi Electric GT1685 Connection Manual page 119

Example 3: When using CPU direct connection or computer link connection
Q(Q mode)
• Monitor accessible range of devices (other than B or W) of other stations or other networks
Specify the accessing network No. or station as shown in the following table.
(1) To monitor B or W of the connected station (host station) assigned with a network parameter, specify the host
station.
(2) To monitor another station (other than B or W) or another network, specify the station (network No. and station
No.).
Station to be accessed
Station
AnU (1-1)
connected to GOT
AnU (1-1)
Q (Q mode) (1-2)
Other (1-1)
AnA (1-3)
Other (0-0)
(1-4)
AnU
(2-2) Other (1-1)
QnA (2-1)
Other (1-1)
AnN (2-3)
AnU (2-4)
POINT POINT POINT
Monitoring link device B or W
For monitoring devices B and W that are allocated by the link parameter, use the host device number even when
designating devices allocated to another station.
Otherwise, the display speed will be reduced.
Control station
AnU
(1-1)
Network No.1
(1-2)
AnA
(1-3)
Network No.1
Q(Q mode)
AnA (1-3)
(1-2)
Host ── Other (1-3)
Host ──
── Host
── ──
Other (1-2) ──
── ── ──
── ── ──
3.1 Access Range for Monitoring Stations on Network Systems
Control station
QnA
(2-1)
AnU
(1-4)
Network No.2
(2-2)
AnN
(2-3)
AnU (1-4) QnA (2-1)
Other (1-4) ──
Other (1-4) Other (2-1)
── ──
Host ──
Other (1-4) Host
── ──
── ──
How to read the table
Upper line:
Lower line:
3. ACCESS RANGE FOR MONITORING
AnU
(2-4)
Network No.2
AnU (2-2) AnN (2-3) AnU (2-4)
Other (2-2) ── ──
Other (2-2) ── Other (2-4)
── ── ──
Host ── ──
Other (2-2) Other (2-3) Other (2-4)
── Host ──
Other (2-2) ── Host
Accessibility
: Accessible
: Not accessible
Network settings
Host
Other (Network No. - Station number)
1
2
3
4
5
6
7
8
3 - 9