Access Range For Monitoring When Connecting Fxcpu - Mitsubishi Electric GT1685 Connection Manual

Got1000 series

Table of Contents

Setting method of monitor device

The following example describes the method of setting the network No. and the station numbers when setting

monitor devices .

(1) Monitoring the connected station (host station) and B and W allocated by the link parameter

Specify the host station.

(2) Monitoring devices of other stations

Network No.: 0, Station number: Refer to the following table.

Setting of the station No.

connected to GOT

Monitoring link device B or W

For monitoring devices B and W that are allocated by the link parameter, use the host device number even when

designating devices allocated to another station.

Otherwise, the display speed will be reduced.

3.5 Access Range for Monitoring when Connecting

The access range that can be monitored for the direct CPU connection is only the connected CPU. (The GOT cannot

monitor other stations.)

The access range that can be monitored for the Ethernet connection is the host and others.

The access range that can be monitored for the multi-drop communication is only the CPU to which the serial multi-drop

connection unit (GT01-RS4-M) is connected directly.

3. ACCESS RANGE FOR MONITORING

3.5 Access Range for Monitoring when Connecting FXCPU

Station to be accessed

Show Quick Links

Table of Contents