Mitsubishi Electric GT1685 Connection Manual page 325


Utility setting for C Controller module (Q
Series)
(1) Q12DCCPU-V
Use SW3PVC-CCPU-E Ver.3.05F or later for the C
Controller (Q Series) setting utility.
(a) Connection settings
Item
*1
192.168.3.3 (Default)
Target module
Write authority Mark the checkbox
*2
User name
*2
Password
Detailed settings
: Necessary
*1 If the IP address of the C Controller module (Q Series) has
been changed, input the changed IP address or host name.
*2 If the account of the C Controller module (Q Series) has
been changed, input the changed user name and password.
(b) Online operation
Item
Detailed settings
: Necessary
Setting
necessity at
Set value
GOT
connection
target
password
-
: As necessary : Not necessary
Setting
necessity at
Set value
GOT
connection
Refer to (3)
: As necessary : Not necessary
(c) Detail settings
Item
IP address
Subnet mask 255.255.255.0
Default gateway
IP address settings CH2
: Necessary
8. ETHERNET CONNECTION
8.4 PLC Side Setting
Setting
necessity at
Set value
GOT
connection
192.168.3.1
-
-
: As necessary : Not necessary
8 - 39
1
2
3
4
5
6
7
8