Memory Check Operation - Mitsubishi Electric GT11 User Manual

14.6.3 Memory check operation

Carries out write/read check of memory.
The following example explains about Memory Check using Flash memory (C drive).
For the standard CF card (A drive) memory check, install the CF card before carrying out the same key
operations as Flash memory.
14 - 114
14.6 Memory Check
14.6.3 Memory check operation
When drive is not displayed
When the drive (memory) to check is not displayed, confirm the mounting procedure
or memory type with reference to the following.
• CF card inserting/removing method
When no faults are found in mounting, etc, a memory failure may be arisen.
Replace the CF card or Flash memory (C drive).
For details of Flash memory, contact your nearest sales office or FA Center.
Section 8.1 CF Card
Select [Flash Memory] in the [Memory check]
1
setting screen, and touch the
If select the button, the numeric keyboard
OK
window is displayed.
If select the
Cancel
to the initial menu.
5 9 2 0
Touch
2
(The password is fixed to 5920.)
Touching executes read/write check for
Enter
the flash memory.
button.
Check
button, the screen returns
and then .
Enter