Mitsubishi Electric GT11 User Manual page 81

Removing
2
Set the CF card access switch of the GOT to "OFF."
1
Make sure that the CF card access LED turns off.
When the CF card access LED turns off, the CF card can be installed
or removed even during the GOT power on.
Push-in the CF card eject button of the GOT to eject the CF card,
2
and then remove the CF card.
Precautions for removing the CF card
(1) While the CF card access LED is on, do not install/remove the CF card or power
off the GOT.
To do so may cause data corruption or malfunction.
(2) When ejecting the CF card, support it by hand since it may pop out.
Failure to do so may cause a fall of the CF card leading to failure or damage of
the card.
8.1.2 Installing and removing procedures of the CF card
CF card
CF card access
access LED
switch
CF card
I/F
INPUT
24V DC
+ -
CF card
GT1155-QTBD, GT1155-QSBD,
GT1150-QLBD
Push.
CF card
eject
button
8 - 3
8.1 CF Card
1
2
3
4
5
6
7
8