Siemens SICHARGE D Operating Instructions Manual page 114

Operation
7.2 Starting the charging process
• Credit card
The credit card reader is located below the touch screen. The credit card terminal is
activated when the contactless payment process is ready.
The transaction processes are displayed on the touch screen of the charging station.
Before the charging process begins, the limit for credit card transactions is reserved for
contactless payments and shown on the display. The limit is set by the OCPP backend
(PaymentTXMaxAmount). If you do not finish the charging process beforehand, the OCPP
backend will terminate the charging process when this limit is reached.
To download the e-receipt of your transaction, select the help screen. Scan the QR code
displayed. On this website you can then download the e-receipt for your transaction to
your end device.
Registration with an EMSP backend is not necessary, in contrast to contract-based
charging.
NOTE
An e-receipt service is available for CVV terminals. This service is configured via the SCB.
Plugging in the charging cable
If the charging cable is not yet connected to the vehicle, you are prompted after the
authentication to connect the plug to your vehicle. The charging process starts automatically
for the CCS and AC Type 2 plug types.
If you are charging via the CHAdeMO port, then you will have to start the charging process
manually on the screen.
Communication between the vehicle and charging station begins. The charging plug is
locked, and the charging process begins after a brief preparation period. The display switches
again and various information on your charging process is displayed.
A customer charging cable is required for charging at the AC charging socket. In addition to
the protective cover, the socket has an integrated shutter. Lift the protective cover to connect
the charging cable plug to the charging station. Insert the plug into the socket at the top and
push it in the direction of the charging station. This removes the shutter lock. Move the
charging plug downwards. When the plug has reached the final position, it latches into the
contacts of the socket. After initialization, the charging cable is locked by the charging station
and the charging process is started.
114
Operating Instructions, 11/2023, A5E50556539-AG
SICHARGE D