Siemens SICHARGE D Operating Instructions Manual page 91

4. Place the rope
Figure 5-20 Positioning the rope and meander pin
5. Place the meander pin
Make sure that the smooth side of the meander pin faces upwards towards the rope loop.
6. Join both parts of the cable clamp together. Ensure the correct fit of the meander pin and
rope.
Figure 5-21 Screwing in the cable clamp
7. Place the M4 nuts in the hex holes. Insert the M4x14 hexagon socket-head screws
opposite the nuts. Carefully screw in the cable clamp.
– Allen key size 2.5 mm
– The tightening torque is 3 Nm
SICHARGE D
Operating Instructions, 11/2023, A5E50556539-AG
②
in the rope clamp in the form shown in the figure.
③
in the rope loop and in the groove provided in the rope clamp.
Installation and mounting
5.5 Setting up the charging station
91