Transport And Storage; General Information - Siemens SICHARGE D Operating Instructions Manual

Transport and storage

4.1

General information

Depending on the local conditions and customer requirements, two transport options are
available. In general, transport from the factory and to the installation location is by truck.
These options are available at the installation location:
• Truck for forklift unloading
• Truck for crane unloading
NOTE
The packaging is different depending on the shipping type (road, air or sea). The packaging
materials for export by air or sea correspond to the IPCC standard ISPM no. 15.
Make sure that the hoisting gear and machines used are suitable for the weight of the
charging station. Also pay attention to the dimensions of the charging station. Only transport
the charging station vertically. For exact details, refer to Technical specifications (Page 136).
NOTE
Please note that the transport packaging does not provide sufficient protection against the
weather. Before installation, store the equipment only under a roof and protected from the
effects of the weather.
Transporting charging stations on the load carriers
The charging station is always delivered fastened to the load carrier. The load carrier can vary
depending on the shipping type. Transport on a load carrier protects the charging station
from damage and facilitates transport. Therefore, always transport the charging station on
the load carrier.
Elevating tailgate of a truck
When transporting with a truck with an elevating tailgate, follow these instructions and
specifications.
• Minimum payload of the elevating tailgate is designed for the sum of these weight
specifications:
– Weight of the ordered charging station
– Weight of the lift truck or industrial truck used
– Weight of one person
• Do not tilt the elevating tailgate for unloading. A few examples of this:
– Unload at an elevated curb
– Unload with a forklift
– Unload with a crane
SICHARGE D
Operating Instructions, 11/2023, A5E50556539-AG
4
63