Road Transport - Siemens SICHARGE D Operating Instructions Manual

4.2

Road transport

Description of packaging
Always use the supplied transport skids including screw material.
In road transport, the packaging consists of two transport skids as load carriers, a
polyethylene (PE) hood and an attachment frame. The box of accessories is attached to the
side of the packaged charging station.
Information on the dimensions and weight of the packaging can be found in the section
"Technical specifications (Page 136)".
Load securing
Load securing must always be performed properly and only by qualified personnel. The
package must be arranged on the truck in a form-fitting manner. For additional load securing,
anti-slip mats must be placed under the entire contact area between the transport pallet and
the loading area of the truck.
The load must be additionally secured with lashing material and a lashing force of 400 daN. A
tension belt is placed around the package. The attachment frame on the roof protects the
charging station from possible damage caused by the force exerted by the tension belts. The
attachment frame must always be put in place before the tension belt is attached. Only
transport skids from Siemens AG are used for transport and load securing purposes.
Figure 4-4 Packaging for road transport
SICHARGE D
Operating Instructions, 11/2023, A5E50556539-AG
Transport and storage
4.2 Road transport
67