Technical Specifications - Siemens SICHARGE D Operating Instructions Manual

Technical specifications

AC nominal input
Voltage
Current at nominal voltage
per phase
Input power
Frequency
Power factor
Short-circuit strength
THDi
Line supply type
Connection to the power grid
Unless otherwise specified, all values apply to room temperature 25 °C
DC output
Nominal power ex works
Upgradable in the field
Dynamic Power Allocation (DPA)
Voltage (range)
Power consumption in
standby
Charging point options
Maximum current of the char­
ging cables
Interface for additional dispensers (parallel
charging)
Efficiency η
Cable length
Unless otherwise specified, all values apply to room temperature 25 °C
136
Unit Value
V 400 ± 10 %
A Depending on the selected configuration of the SICHARGE D
301 ... 515
Table for individual configuration (Page 75)
kVA 170 ... 340
Hz 50/60
cos φ > 0.99
kA 50 kA
% < 3
TN-C, TN-S, TT (permanently connected)
Input voltage AC
TN-S: Up to 2x(5x185 mm²) or 1x(5x300 mm²)
TN-C/TT: Up to 2x(4x185 mm²) or 1x(4x300 mm²)
Unit Value
kW 160, 180, 240, 300
Up to 300 (in 20 kW increments)
Between DC charging points during the charging process
V 150 ... 1000
W Max. 260, when fans and heaters are turned off
DC • 2 x CCS2
• 1 x CCS2, 1 x CHAdeMO
AC option­ AC Type 2 mode 3 socket with cover and lock, 22 kW, 32 A including RCD
al
A CCS2: 1x400 (air-cooled charging cable)
CCS2: 1x500 (liquid-cooled charging cable)
CHAdeMO: 1x125
Can be ordered with a pre-installed interface for connecting 1 dispenser with
2 DC charging points
% > 95 rated value
> 96 peak value
m • 3.1
• 5
Operating Instructions, 11/2023, A5E50556539-AG
12
SICHARGE D