Ac Actuator - Huawei FusionDC1000A Product Description

FusionDC1000A Prefabricated All-in-One Data
Center
Product Description (IT Scenario)
(9) BLINK button
Specifications
Table 6-23 Technical specifications of a smart ETH gateway
Item
Power input
Power
output
FE port
PoE port
BLINK
button

6.5 AC Actuator

The AC actuator is used in a smart module to control the lighting inside the smart
module by receiving commands from the access control system or host, infrared
linkage information (disabled by default), or signals from the light button. It also
provides a charging port for the PAD (AC OUT2).
Issue 04 (2023-11-10)
(10) Status indicator
Specifications
PWR_IN D-type power input terminal, for power cascading, input
voltage range: 45–55 V DC
● PWR_OUT D-type power output terminal, for power
cascading, output voltage range: 45–55 V DC
● 48V_OUT1 and 48V_OUT2, Phoenix terminal, output voltage
range: 45–55 V DC
Two FE ports, RJ45 terminal with an indicator, 10/100M
communication rate, for the cascading between smart ETH
gateways and the communication with the host
Four PoE ports, RJ45 terminal with an indicator, 10/100M
communications rate, complying with IEEE802.3at
If you press the BLINK button, the RUN indicator blinks
intermittently at super short intervals (blinking at super short
intervals for 0.5s and then off for 0.5s) for 10s.
Copyright © Huawei Digital Power Technologies Co., Ltd.
6 Management System
83