Huawei FusionDC1000A Product Description page 71

FusionDC1000A Prefabricated All-in-One Data
Center
Product Description (IT Scenario)
Figure 6-1 Management system networking diagram
Table 6-1 Management system configurations
Function
Client
authorization
Work order
management
Energy efficiency
management
Issue 04 (2023-11-10)
NO TE
● Common card readers are configured for the access control system by default, and they
should be used at an ambient temperature ranging from –40°C to +85°C. Customized
three-in-one fingerprint and card readers with keypads are also supported, and they
should be used at an ambient temperature ranging from –10°C to +55°C. The three-in-
one card readers cannot be used outdoors when the ambient temperature is below –
10°C or exceeds 55°C.
● The camera uses an SD card with a capacity of 64 GB for storage by default, and
supports 7x24 recording at 720P/512K. A video management device (IVS) should be
configured if there is a need of longer-time storage, management, and configuration of
external cameras.
● Scenario without an IVS: Connect the signal cables of the indoor and outdoor cameras
to the PoE ports on the smart ETH gateway.
● Scenario with an IVS: Connect the signal cables of the indoor and outdoor cameras to
the LAN switch.
ECC800-Pro
16 PCS
No
Yes
Copyright © Huawei Digital Power Technologies Co., Ltd.
NetEco
One license manages up to 25 smart nodes.
Yes
Yes
6 Management System
64