Huawei FusionDC1000A Product Description page 83

FusionDC1000A Prefabricated All-in-One Data
Center
Product Description (IT Scenario)
Indica
tor
ALM
RF_Z
SW Button
Table 6-15 SW button description
Function
Description
Wireless
network RF_Z
(802.15.4)
pairing
Issue 04 (2023-11-10)
Color Name
Red Alarm indicator
Green Communication
status indicator
Operation Description
In non-wireless network (802.15.4)
pairing mode, hold down the button
for 3s to 5s to enter the wireless
network pairing mode.
In wireless network (802.15.4)
pairing mode, hold down the button
for 3s to 5s to exit the pairing mode;
or the system automatically exits the
pairing mode after 30 minutes.
Copyright © Huawei Digital Power Technologies Co., Ltd.
6 Management System
Status Description
Blinking at The software runs properly
long (the indicator blinks at 0.5
intervals Hz, on for 1s and then off
for 1s) or the ECC800-Pro
registers with the
management system
successfully.
Blinking at The ECC800-Pro does not
short register with the
intervals management system (the
indicator blinks at 5 Hz, on
for 0.1s and then off for
0.1s).
Steady on A system failure alarm is
generated.
Off The system is normal.
Blinking at A network is set up, and no
long node access is allowed (the
intervals indicator blinks at 0.5 Hz, on
for 1s and then off for 1s).
Blinking at A network is set up, and
super node access is allowed (the
short indicator blinks at 10 Hz, on
intervals for 0.05s and then off for
0.05s).
Indicator Status
The RF_Z indicator is
blinking at super
short intervals.
The RF_Z indicator is
blinking at long
intervals.
76