Table of Contents
Advertisement
Figure 82. Removing the backplane cover
Installing the backplane
Prerequisite
Follow the safety guidelines listed in
NOTE:
The procedure to install the backplane is similar for all backplane configurations.
Steps
1
Use the hooks on the system as guides to align the slots on the backplane with the guides on the system.
2
Lower the drive backplane until the blue release tabs snap into place.
NOTE:
If you are installing a backplane with an expander board, then tighten the captive screws after installing the
backplane.
132
Installing and removing system components
Safety
instructions.
Advertisement
Table of Contents
