Table of Contents
Advertisement
Option
Description
Option
iSCSI Device1 Settings
Integrated Devices
You can use the Integrated Devices screen to view and configure the settings of all integrated devices including the video controller,
integrated RAID controller, and the USB ports.
Viewing Integrated Devices
To view the Integrated Devices screen, perform the following steps:
1
Power on, or restart your system.
2
Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3
On the System Setup Main Menu screen, click System BIOS.
4
On the System BIOS screen, click Integrated Devices.
Integrated Devices details
The Integrated Devices screen details are explained as follows:
Option
Description
User Accessible
Configures the user accessible USB ports. Selecting Only Back Ports On disables the front USB ports; selecting
USB Ports
All Ports Off disables all front and back USB ports; selecting All Ports Off (Dynamic) disables all front and back
USB ports during POST and front ports can be enabled or disabled dynamically by an authorized user or authorized
users without resetting the system.
The USB keyboard and mouse function in certain USB ports during the boot process, depending on the selection.
After the boot process is complete, the USB ports will be enabled or disabled as per the setting.
Internal USB Port
Enables or disables the internal USB port. This option is set to On or Off. This option is set to On by default.
iDRAC Direct USB
The iDRAC Direct USB port is managed by iDRAC exclusively with no host visibility. This option is set to ON or
Port
OFF. When set to OFF, iDRAC does not detect any USB devices installed in this managed port. This option is set
to On by default.
Integrated RAID
Enables or disables the integrated RAID controller. This option is set to Enabled by default.
Controller
Integrated Network
Enables or disables the integrated network card (NDC). When set to Disabled, the NDC is not available to the
Card 1
operating system (OS). This option is set to Enabled by default.
58
Pre-operating system management applications
NOTE:
The Internal SD Card Port on the PCIe riser is controlled by Internal USB Port.
NOTE:
If set to Disabled (OS), the Integrated NICs might still be available for shared network access by
iDRAC.
Description
Enables you to control the configuration of the iSCSI
device.
Advertisement
Table of Contents
