Pipe Support - Huawei FusionCol8000-E140 Quick Manual

FusionCol8000-E140 Modular Indirect Evaporative
Cooling System
Quick Guide (2021, Ireland)
Table 1-2 Required water pipe specifications
Name
Spray water
refill pipe
Spray
drainpipe
Condensate
drainpipe

1.2.3 Pipe Support

Figure 1-3 Pipe supports (unit: mm)
Issue 02 (2023-08-03)
Connector
G 3/4 inch
external
thread
connector
G 1–1/2 inch
internal
thread
connector
G 3/4 inch
internal
thread
connector
NO TE
● The support appearance is for reference only. The actual product may vary.
● The height of the U-shaped pipe clamp is 5 mm less than the pipe diameter (including
the thermal insulation foam).
● Install a support every 2500 mm for the straight sections of pipes, and 1000 mm away
from each bending point in turning sections.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Pipe Material
Dimensi
ons
DN20 Rigid pipe: made
of PP-R, C-PVC, or
other materials
DN40 Rigid pipe: made
of PP-R, C-PVC, or
other materials
DN20 Rigid pipe: made
of PP-R, C-PVC, or
other materials
1 System Installation
Qua Length
ntit
y
1 Engineeri
ng
purchase.
Determin
ed by the
1
engineeri
ng
survey.
1
8