Installing Cables For The Water Sensor And T/H Sensors - Huawei NetCol8000-C190 User Manual

NetCol8000-C190 In-room Chilled Water Smart
Cooling Product
User Manual (2022, Singapore STT)
Figure 3-29 Fan cable routing
(1) Fan power cable terminal
(4) Fan signal cable terminal
Step 2 Route the three fan power cables through the power cable hole and connect them
to the interconnection terminals on the frame.
Step 3 Route the fan signal cable (after serial connection) through the fan signal cable
hole and connect it to the signal cable terminal on the fan rack.
Step 4 Route the NTC cable through the fan signal cable hole and connect it to the NTC
wiring terminal.
----End

3.6.6 Installing Cables for the Water Sensor and T/H Sensors

Step 1 Determine the cable routes.
Issue 02 (2022-03-30)
(2) Fan power cable
(5) NTC cable
Copyright © Huawei Technologies Co., Ltd.
3 Installation
(3) Fan signal cable
(6) NTC wiring terminal
53