Huawei NetCol8000-C190 User Manual page 76

NetCol8000-C190 In-room Chilled Water Smart
Cooling Product
User Manual (2022, Singapore STT)
Table 4-2 Parameter description
Menu
Select
Language
Date & Time
Settings
Teamwork
Settings
System
Optional
Parts
Issue 02 (2022-03-30)
Parameter
/
Date format
Date settings
Time zone
Time
Teamwork group
No.
System address
Teamwork
function
Networking
mode
Number of
systems in this
group
Number of
running systems
in this group
Return air sensor
Cold aisle sensor
Hot aisle sensor
Copyright © Huawei Technologies Co., Ltd.
4 Power-On Commissioning
Description
Specifies the display language.
Specifies the date format.
Specifies the time zone.
Specifies the time zone.
Specifies the time.
Specifies the planned teamwork group
number. This parameter should be the same
for all units in the same teamwork group.
Specifies the planned unit address. The
addresses of units in the same teamwork
group must be unique.
Specifies whether to enable the teamwork
function. Set this parameter based on onsite
heat load distribution.
● Disable: A unit operates independently.
● Enable: A unit operates in team with
other units.
Specifies the networking mode for
teamwork control. The networking mode
selected on the screen must match the
actual networking mode. Otherwise, the
teamwork function is unavailable.
Specifies the total number of units in this
group. The value is an integer ranging from
1 to 32.
NOTE
This parameter is displayed after Teamwork
function is set to Enable.
Specifies the number of running units in this
group. The value is an integer ranging from
1 to the value of Number of systems in
this group.
NOTE
This parameter is displayed after Teamwork
function is set to Enable.
Enables or disables a sensor.
Enables or disables a sensor.
Enables or disables a sensor.
68