Up And Down-Ranging Using The Range Key - HP 8112A Operating, Programming And Servicing Manual

X = Non-active Slope
Y = Active Slope
Up and Down-ranging
Using the RANGE key
Figure 4-9. Ranging examples
Active slope moves from Range 3 to Range 2 (Yl)
Inactive slope Change Value
Active slope moves from Range 3 to Range 4 (Y2)
x 3
When this key is used to move a currently active slope up or down
a range, the non-active slope will be automatically pulled into the
Same Decade as the active slope setting. This effect is particularly
useful1 for fast ranging between decades.
Y2
Table 4-2.
Reason
o
in overlap with higher range (4)
Table 4-3.
no change in overlap with higher range