Rear Panel
NO OPERATOR SERHCEABLE
PARTS INSIDE. REFER SERVlClNG TO TRAINED PERSONNEL
FUSE
MARKER
HOLD-IN
X-OUT
OUTPUT
0
0
0
0
FTZ-SERIENPRUFNR.
C-318/86
FOR CONTINUED FIRE PROTECTION USE SPECIFIED'L
LINE FUSE.
Figure 4-12. Rear panel
HP-IB Connector
Refer to Figure 3-3 for a definition of the HP-IB connector pins.
Refer to "Setting the HP-IB Address" in Chapter 6 if you want to
know how to set the instrument's HP-IB address.
x-out
Not used with HP 8112A.
Marker Output
Not used with HP 8112A.
Hold In
Not used with HP 8112A.
Fuse
The fuseholder accepts standard fuses to provide instrument
protection in case of current overload. Refer to Table 3-l for
appropriate fuse selection.
4-18 Operating