Wlan Wakeup - Huawei JUPITER-3000K-H1 Smart User Manual

JUPITER-(3000K, 6000K, 9000K)-H1 Smart
Transformer Station
User Manual
Parameter
(Optional)
Display
(Optional)
Reverse flag
(Optional)
Signal
association
Figure 5-8 Setting user-defined parameters
----End

5.7 WLAN Wakeup

This section describes how to enable the built-in WLAN module of the main
control module.
Step 1 Choose Monitoring > STS > Running Param. > O&M Parameters.
Step 2 Ensure that O&M via WLAN connection is Always ON.
Step 3 Set WLAN wakeup to Wakeup.
Issue 02 (2023-09-30)
Description
Select this option if the user-defined signal needs to be
displayed on the Teleindication page.
Select this option if reverse display is required.
Select this option if telecontrol signals need to be associated.
After selecting this option, set the following parameters:
● Associate with telecontrol signal source: Set the physical
location of the associated telecontrol signal measurement
and control module.
● Associate with telecontrol IO signal: Set the port
number of the associated telecontrol signal.
● Association policy: Set the conditions for triggering
command execution on the DO port.
Copyright © Huawei Technologies Co., Ltd.
5 Human-Machine Interaction
92