Replacing A T/H Sensor In The Mv Panel - Huawei JUPITER-3000K-H1 Smart User Manual

JUPITER-(3000K, 6000K, 9000K)-H1 Smart
Transformer Station
User Manual
Step 4 Set the DIP switch on the new T/H sensor.
Table 6-2 DIP switch settings
Toggle
Switch
1
ON
Step 5 Install a new T/H sensor on the base, and install them in the original position.
Step 6 Reconnect the cables to the new T/H sensor based on the cable connection
records.
Step 7 Close the doors.
----End

6.8.14.2 Replacing a T/H Sensor in the MV Panel

Context
If a T/H sensor is found damaged during maintenance, power it off and replace it.
Figure 6-49 Position of the T/H sensor
Issue 02 (2023-09-30)
Toggle Toggle Toggle
Switch Switch 3 Switch
2 4
OFF OFF OFF
Copyright © Huawei Technologies Co., Ltd.
6 System Maintenance
Toggle Toggle Toggle Switch 7
Switch Switch
5 6
OFF OFF OFF
179